Reverse Sear Steak Planner

The reverse sear cooks a steak low until it is a few degrees under your target, then finishes with a hot sear. Pick a doneness and thickness to get the pull temp to watch and how long to sear each side.

Your steak

Pull temp to watch

122F
pull for medium rare, warm red center
Final temp after sear132F
Rest before searing10 min
Sear time60 sec per side

Steps

  1. 1Cook low. Smoke or roast at 225 to 275F until the center reads 122F.
  2. 2Rest and heat. Rest 10 minutes while a pan or grill gets screaming hot.
  3. 3Sear hot. Sear about 60 seconds per side to build a crust.
  4. 4Serve. Carryover brings the center to about 132F.

How the pull temp works

Carryover is the temperature rise that keeps happening after you move the steak off the low heat. The rest and the hot sear together add roughly 10F, so the plan pulls the steak at 10F under your final target.

A leave-in probe makes this easy: set an alarm for the pull temp, then sear fast and hot once the surface has dried during the rest. Thicker steaks get a slightly longer sear to build the same crust.

These are planning targets. Trust your thermometer over the clock, since cooker temp and steak shape change how fast the center climbs.